The surfaces are complete and now i am ready to apply shellac and ready to paint. Before i applied shellac i sanded the clay surface using a 800 grade wet and dry, this was to make the surface a bit more rough so the shellac can fully be glued and seal the surface of the clay. I didn't sand back the shellac after each coat and the last coat i left it for a whole night to dry before i started applying primer on. The first coat of primer i used is a K&H plastic primer, which apparently sticks better compared to a normal primer filler. I applied 2 coat of that and then applied another 2 coat of 3 coats of primer filler to get rid of any scratches or imperfection. (sanded each coat of primer filler down with an 1200 wet and dry.)
Monday, November 15, 2010
Week 16
The surfaces are complete and now i am ready to apply shellac and ready to paint. Before i applied shellac i sanded the clay surface using a 800 grade wet and dry, this was to make the surface a bit more rough so the shellac can fully be glued and seal the surface of the clay. I didn't sand back the shellac after each coat and the last coat i left it for a whole night to dry before i started applying primer on. The first coat of primer i used is a K&H plastic primer, which apparently sticks better compared to a normal primer filler. I applied 2 coat of that and then applied another 2 coat of 3 coats of primer filler to get rid of any scratches or imperfection. (sanded each coat of primer filler down with an 1200 wet and dry.)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment